Home
Sitemap
Contact
About WRCLA
 
Overview
Siding Choices
Bevel Siding
Overview
Uses
Grades
Sizes
Coverage Table
Specifications
Tongue & Groove Siding
Lap Siding
Board & Batten Siding
Trim Boards
Siding Photo Gallery
BEVEL SIDING | SPECIFICATIONS

The following information is required when specifying bevel siding products:

Specification Information Required Sample Specification
Species:
Western Red Cedar
WRCLA Western
Red Cedar
Product Pattern and Intended Use:
Siding is used as an exterior cladding to provide both weather protection and architectural style. The designer may choose from plain bevel, rabbetted bevel, or wavy edge bevel.
Plain Bevel Siding
Size:
Specify the nominal size of the product.
1/2 x 6 in.
Grade:
The grade of the product governs its overall quality. Refer to WRCLA specification literature or grading agency rule books for available grades.
Clear V.G. Heart
Grading Agency Paragraph:
To ensure that the product meets a written standard, an agency grade paragraph should be referenced.
NLGA para. 201a
Moisture Content:
Specify whether the product is to be green (unseasoned) or kiln-dried.
Kiln dried
Surface to be exposed:
Specify the application orientation to assist the supplier in shipping the right product for the job.
Surface face
Quantity:
Express in surface measure the quantity required. See table for factor to convert square feet to surface measure.
5500 surface measure
 



©2006 Western Red Cedar Lumber Association | Disclaimer | Site Administrator
Website design in Vancouver by Graphically Speaking