Home
Sitemap
Contact
About WRCLA
 
Overview
Siding Choices
Bevel Siding
Tongue & Groove Siding
Lap Siding
Board & Batten Siding
Overview
Uses
Grades
Sizes
Coverage Table
Specifications
Trim Boards
Siding Photo Gallery
BOARD & BATTEN SIDING | SPECIFICATIONS

Specification Information Required Sample Specification
Species:
Western Red Cedar
WRCLA Western Red Cedar
Product Pattern and Intended Use:
Siding is used as an exterior cladding to provide both weather protection and architectural style. The designed may choose from clear or knotty, kiln dried or green (unseasoned), rough sawn or surfaced on one side and two edges (S1S2E).
S1S2E Boards
Size:
Specify the nominal size of the product.
1"x 3" Battens
1"x10" Boards
Grade:
The grade of the product governs its overall quality. Refer to WRCLA specification literature or grading agency rule books for available grades.
A and Better
Grading Agency Paragraph:
To ensure that the product meets a written standard, an agency grade paragraph should be referenced.
NLGA para.
200a, b
Moisture Content:
Specify if the product is to be green (unseasoned) or kiln-dried.
Kiln dried
Surface to be exposed:
Noting the application orientation will assist the supplier in shipping the right product for the job.
Resawn face
Quantity:
Express in linear feet
10,000 linear feet
1"x3"
10,000 linear feet
1"x10"
 



©2006 Western Red Cedar Lumber Association | Disclaimer | Site Administrator
Website design in Vancouver by Graphically Speaking